ChargingChargers


RediPulse PRO-12-RP Charge/Maintenance System 746X915


If you sell, stock or service lead-acid batteries, you need the PulseTech Pro-12 Charge/Maintenance System. It is designed to keep new batteries factory-fresh while they rest on the shelf waiting to be installed or sold. Batteries that sit idle suffer from damaging sulfation buildup (lead sulfate deposits on the battery plates). This buildup is the main cause of battery problems and failure. The Pro-12 uses scientifically-proven ReNew-IT Pulse Technology to keep these deposits off the plates. By removing these energy-dampening deposits, your batteries are stronger than ever. This means your shelf-life warranty issues and other battery-related expenses are reduced dramatically. The PRO-12 is an AC powered 12 output desulfator, that has very little charge value. This may charge small lead acid batteries up to about 5 amp hour, but really is best used in a shop or store environment where multiple lead acid batteries are stored or kept ready for sale. It keeps them charged and desulfated, at peak power, ready to go.


Pulsetech PRO-12 Pulsetech Part#: PRO-12-RP

RediPulse PRO-12 746X915
12 Volt 12 Bank Desulfator

$170




Specifications:  Features:
DIM (LxWxH):7.25 x 2.35 x 1.0 LED Indicators
Charge Current:750 ma Reverse Polarity Protected
Actual Weight:4.5 Automatic
Ship Weight:6.0 Desulfator
Output cables:6 Ft. Safe for Gels
Input:100 - 240 VAC 2 Year Warranty

Benefits of the PRO-12-RP 746X915

  • Maintains and improves up to twelve 12-volt batteries in new condition.
  • UL approved & no personal use hazards.
  • Audible signal indicates reverse connection.
  • Can be mounted vertically or horizontally.
  • Spark-Proof. There is no power output at the battery connection leads unless the Pro-12 senses a battery is connected.
  • Low amperage and smart charging technology means there is no gassing.
  • Water resistant.
  • Three color indicators give condition of each battery- ( 1 three colored LED per battery): Green = good, Yellow = charging, Red = low.
  • Battery condition indicator is updated every two seconds.
  • Charging indicator verifies indicated battery is being charged.
  • Pro-12 indicator is illuminated when batteries are being pulse conditioned.
  • Cables and battery clips are provided in sets of three and are removable and replaceable if damaged.
  • UL class 2 power supply designed for universal input will adapt to AC power anywhere.
  • On-off switch mounted in rear of unit discourages tampering. Press and hold on-off switch button to activate.
  • Batteries must be at greater than 8 volts for Pro-12 to activate.
  • Will maintain 6 volt batteries if two are connected in series.
  • Steel-Nickel plated battery clips.
  • Warranty: 2-year limited.

PulseTech's unique and patented PULSE technology increases the duty and life cycles of any size or type of 12-V lead-acid battery by minimizing the size of the lead sulfate crystals. This allows a battery to accept as much charge as possible. PULSE technology helps ensure that your new batteries will stay in like-new condition while older batteries often improve dramatically. Duty cycles are typically extended from three to five times for all types of lead-acid batteries!

Used extensively by consumers and the U.S. Military worldwide for almost ten years, this technology has been scientifically proven by two major universities to make batteries work harder and last longer than you ever thought possible.




Be sure to see our battery charging tutorial.


Home | PulseTech Desulfators | PRO-12 12 Bank Desulfator/Maintainer
ChargingChargers