|24 Volt 100 Amp $1270|
|36 Volt 100 Amp $1446|
|48 Volt 100 Amp $1485|
One touch programming allows these chargers to charge deep cycle, wet starting, gel, and AGM batteries with precision. Also programmable is type of gassing mode, and recycle times when in shut off mode. The 2 digit LED displays percent of charge to complete cycle, and battery voltage. A tricolor LED also follows charge progress. Can be temperature compensated. DC current limiting, and polarity protected. Best of all, they are made in the USA, and have a 3 year warranty. These are built to order by the manufacturer, so allow about 2 weeks lead time. They ship truck freight.
Float: Regulates the battery voltage at just below the gassing threshold. Best for starting batteries, and gel's.
Gas & timed shut off: Timer trips at the gassing threshold. Batteries are allowed to gas for three hours before shut off. Best for deep cycle batteries.
Gas & float: Timer trips at the gassing threshold. Batteries are allowed to gas for three hours before dropping into indefinite float/maintenance mode. Best for deep cycle batteries that may see long periods of inactivity.
AGM: Timer trips at the absorption threshold. Batteries stay in absorption mode for three hours before dropping into indefinite float/maintenance mode.
Lithium: Must be preprogrammed at factory based on number of cells, and charge to voltage.