RS1 RealPro Series Marine Battery Charger
12 Volt 6 amp single bank waterproof marine grade charger.
The RS1 RealPro Series marine battery charger is a 6 amp per bank, 12 volt independent output, waterproof battery charger.
Independent bank chargers have a separate positive
and negative connection for each bank, and a separate microprocessor which controls
the charging algorithm of the bank. This means that the batteries connected may be of
differing size, age, state of charge, or even type (flooded, sealed). This works well
for an application like a small boat with a starting battery and a trolling motor
battery (or batteries). It also is applicable in series strings of two 12 volt batteries
for 24 volts (the RS2, 2 bank charger), or three 12 volt batteries in a 36 volt
system (the RS3, 3 bank charger). After each battery has its own connection,
the charger does not care if they are series connected for higher voltages, or
parallel connected for higher amperage. This is especially useful in higher voltage
applications, like 24 volt applications where one 12 volt battery in the string is
connected to some 12 volt loads (like radios, depth finders, etc.), and the batteries
end up imbalanced. A straight 24 volt output charger used in this situation would
not properly charge the batteries.
The RS1 RealPro Series single output 6 amp battery charger is appropriate for 12 volt applications
where weather or harsh environments may be encountered. They have mounting flanges
for permanent installation, and can tolerate water, vibration, and temperature. They
are used in marine applications, like boats with a single 12 volt lead acid battery
to charge/maintain, or bulk charging batteries up to about 50 amp hours. They can
be used as maintenance chargers for larger capacity batteries or systems. We like the
size and amperage of the RealPro Series chargers for generator and pump applications, as they
are mountable, waterproof, and vibration proof.
For more information see our Battery Charging Tutorial
Click image for larger picture, "Back" button to return
|
Part#: RS1 Dual Pro 12 Volt RealPro Series Charger $107 |
|
Add to Cart
|
View Cart
|
| Specifications: | Features: | |
| Dim (LxWxH): | 6.5 x 4.5 x 3.0 | Fully Waterproof |
| Actual Weight: | 5.5 | Overcharge Protection |
| Ship Weight: | 7.0 | Reverse Polarity Protection |
| AC Input: | 100 to 240 VAC | Float Mode |
| Output: | 6 Amps | Ignition Protected |
| Banks: | 1 | Short Circuit Protected |
| Approvals: | ISO 8846 | LED Readout |
| Approvals: | USCG 33 CFR183.410 | |
| Warranty: | 2 Years |
Accessories:
|
|
|
|
$25 Dual Pro 5 Foot Charger Cable Extension CCx5 |
$29 Dual Pro 10 Foot Charger Cable Extension CCx10 |
$34 Dual Pro 15 Foot Charger Cable Extension CCx15 |
|
Add to Cart
|
Add to Cart
|
Add to Cart
|
|
|
$89 Dual Pro Starting and Trolling Battery Fuel Gauges BFGOM11 |