The IOTA DLS27-25 24 Volt 25 Amp DC converter uses state-of-the-art, switch-mode technology, to provide a demand sensed 27.2 volt output at up to 25 amps. Exceptionally clean DC output insures pumps, motors, fans, and lights work perfectly. This means longer life for any connected load; virtually no AC ripple to cause static or premature failure of radio or television equipment. Protection against low and transient AC line voltage as well as spikes coming from the AC power source or from improperly adjusted generators, a major cause of converter/power supply failure. Meets F.C.C. criteria, minimizing radio and television equipment interference especially on the lower frequency bands. Lower operating temperature, half that of some switch mode electronic models, even in its subcompact size. This means substantially longer life and safer operation. Tight line-load regulation ensures that the output voltage holds steady from no load to full load. Proportional Fan Circuitry provides an extra measure of protection. During times of heavy load demands, the automatic circuitry will activate the fan before thermal stress can occur on any internal components. External fuses protect the IOTA unit against improper wiring and can be quickly and easily replaced. Multiple units can be operated in series or parallel to increase voltage or amperage.Click image for larger picture, "Back" button to return
Part#: Iota DLS27-25
Iota 24 Volt 25 Amp
|Dim (LxWxH):||9.8 x 6.7 x 3.4||Advanced Switch-mode Design|
|Actual Weight:||6.0||Short Circuit Protection|
|Ship Weight:||8.0||Over Current Protection|
|AC Input:||108 - 132 VAC||Over Voltage Protection|
|AC Input:||50/60 Hz||Demand Sensing|
|Output Volts:||27.2 VDC||Proportional Fan Cooling|
|Output Amps:||25 A||Line Regulation|
|Temperature:||0 to 40C||Thermal Protection|
|Max AC Draw:||12.2 A||UL Listed|
8 Gauge Charger Cable Set
The IOTA Engineering converters are available with a built in microprocessor controller (the IQ4), which turns them into 3 stage battery chargers, with an appropriate bulk voltage (higher than the regular converter voltage), absorption voltage, and float voltage. Some companies sell IOTA converters as chargers, at a lower price, while not indicating that they are one fixed voltage, and while they will charge batteries, at a slower rate than a charger with a higher bulk voltage, we won't use converters as chargers when any sort of amps are involved, or reasonable recharge times expected. We use these units as power supplies only.
IOTA converter/chargers were built in the US in the past. While still excellent quality units, with a 2 year warranty, they are now built in China to IOTA Engineering specifications. Some companies still market Iota units as US built, when they no longer are.