The Dual Pro Eagle I-2412 24 volt 12 Amp battery charger is a commercial grade 24 volt battery charger, with fan cooling and temperature compensation. The Eagle series are heavy duty, microprocessor controlled, thermally protected battery chargers. They are portable or bench top chargers, with a handle. This particular unit comes with the red Anderson SB175 connector, for some Taylor Dunn industrial cart applications, or any 24 volt system that uses this connector.
The Dual Pro Eagle series combine the reliability of a heavy duty transformer, with a microprocessor controller, for long term performance and proper battery management. With temperature compensation and computer control, a quicker, more efficient charge cycle results in complete battery charge, better battery life, and less water loss in flooded batteries. They are safe for the sealed lead acid batteries as well. Eagle chargers go into a float mode when done charging, for long term battery management. The LED array on the charger case indicates status of the battery.
The Eagle series are made in the US, and feature a 3 year warranty. The I-2412 Eagle 24 volt 12 amp battery charger is suitable for moderate use 24 volt systems, including some Taylor Dunn carts, floor scrubbers, golt carts, cargo carts, scissor lifts, and other industrial applications. Battery capacities from about 48 amp hours to about 225 amp hours are appropriate for this charger, depending on use and desired recharge time.
For more information see our Battery Charging Tutorial
Dual Pro 24 Volt 12 Amp
with Red SB175
|Dim (LxWxH):||8.5 x 7.5 x 5.25||Padded Handle|
|Actual Weight:||19.0||Thermal Protection|
|Ship Weight:||20.0||Reverse Polarity Protection|
|AC Input:||115 VAC||Temperature Compensation|
|Output:||12 Amps||Spark Free Hookup|
|Temp Range:||32F to 113F||Short Circuit Protected|
|Float Voltage:||27.0||LED Readout|
|Approvals:||UL 1564 Pending||Red SB175 Connector|
|Warranty:||3 Years||Made In USA|