ChargingChargers


Columbia Battery Chargers

This page lists various replacement chargers for Columbia battery chargers by model number, with the appropriate connector. Click on our replacement model listed after your OEM part number.



36 Volt Columbia Chargers

OEM NumberOEM AmpsConnectorOur Eagle Unit
66499-8225Crowsfoot 36 Volt 25 Amp
66500-69A25Crowsfoot 36 Volt 25 Amp
66500-7525Crowsfoot 36 Volt 25 Amp
66534-8325Crowsfoot 36 Volt 25 Amp
66534-83A25Crowsfoot 36 Volt 25 Amp



Typical charger connectors available on the above chargers



EZGO Plug Club Car Plug Yamaha/MAC Plug

EZGO™ 1996 and later

Club Car™ 1995 and later

Yamaha MAC connector
 
 
Crowsfoot Plug SB50 Gray SB50 Red

Crowsfoot

Anderson SB50/SB175 - Gray

Anderson SB50/SB175 - Red



Dual Pro Columbia Battery Chargers


The Eagle industrial cart battery chargers by Dual Pro are heavy duty, microprocessor controlled, temperature compensating, thermally protected chargers, encased in a powder coated aluminum case. They can be portable or bench top chargers, with a padded handle. They are the basis of the Columbia replacement battery chargers that we have available, and come with a crowsfoot connector.

We offer two amp output ranges, medium and high, for 36 volt industrial carts. The medium range (12 amp) is appropriate for a moderately used cart, or long term maintenance for a cart at a seasonal home. The higher range (25 amp) is appropriate for a heavily used cart, either in hours per day or days per week. Running down to the mailbox, or out to the barn a time or two is moderate use. Running around the warehouse all day long, or 18 holes of golf would be heavy use. The point is to be sure the batteries are fully charged routinely, as partially charged batteries are subject to sulphation, which can be a problem over time.

The Dual Pro Eagle series combine the reliability of a heavy duty transformer, with a microprocessor controller, for long term performance and proper battery management. With temperature compensation and computer control, a quicker, more efficient charge cycle results in complete battery charge, better battery life, and less water loss in flooded batteries, which industrial cart battery chargers are frequently used on. They are safe for the sealed lead acid batteries as well. The Eagle model goes into a float mode when the charge is complete, for long term battery maintenance. The LED array on the charger case indicates status of the battery. This feature allows the charger to be left connected to the cart basically indefinitely, which works well for occasionally used carts or carts at a seasonal home or cabin. This prevents the internal discharge any lead acid battery experiences from forming hardened sulphation, which diminishes run time (capacity), even to the point of total failure. Some of the old chargers with timers or simple transformers could not be left on in this fashion, so frequently they are left disconnected from the cart when the cart would be left for a long time, shortening battery life, and diminishing run capacity. This feature alone is worth the cost of an upgraded charger.

The Eagle battery chargers are made in the US, and feature a 3 year warranty. They are suitable for medium to heavy use in 36 volt industrial carts, personnel carriers, tow carts, cargo carts, and other industrial equipment.

So, take a look at our Columbia cart charger offerings, and call our tech line if you have any questions, or a special application. We only carry quality, reliable products that will do the job if properly selected.





Be sure to check out our Tutorials!



Home | Columbia Battery chargers
ChargingChargers